Extreme Tuning Garageband Mac

  

Explore the world of Mac. Check out MacBook Pro, iMac Pro, MacBook Air, iMac, and more. Visit the Apple site to learn, buy, and get support. Editor’s Note: The following article is an excerpt from Take Control of Recording with GarageBand ‘08, a $10 electronic book available for download from TidBits Publishing.The 122-page ebook. Extreme Tuning uses your song's key and scale settings to apply the effect. If the actual key or scale of your song differs from the key or scale setting, the effect might be less pronounced, or might change the pitch of individual notes in the track in undesirable ways. GarageBand songs defaults to the key of C. Reference Tuning field: Drag vertically to set the pitch of the note used as the basis for tuning. The default is for note A at 440 Hz and can be set in a range from 410 to 470 in 0.1 Hz steps. Keynote display: Shows the target pitch of the note being played (the closest tuned pitch). Tune Deviation display: Shows the tuning deviation in cents. To install GarageBand on Mac and MacBook, you have to follow some step, but they are extremely easy. Use the latest version of Mac OS X to install this app and the exact steps to install GarageBand is here. But before we move to the steps, first take a look at system requirements. System Requirements: To run GarageBand at full capacity, you.

  1. How To Use Garageband On Mac
  2. Garageband Mac Download
  3. Extreme Tuning Garageband Mac Download
  4. Extreme Tuning Garageband Mac Os
  5. Garageband Download
Modifying this control will update this page automatically

GarageBand User Guide for iPad

Using the Audio Recorder, you can record your voice, an instrument or any other sound using the microphone on your iPad, and play it back in GarageBand. You can also record sounds using an external microphone connected to your iPad.

The Audio Recorder has two sets of controls you can use to change the sound. Fun view lets you quickly change the sound of your recording, while Studio view gives you more options to enhance your recording.

You can quickly create a new audio recording from the Home screen or the My Songs browser.

Switch between Fun and Studio view

  • Tap the Fun or Studio button at the top of the Audio Recorder.

Record a sound

  1. Tap the Record button in the control bar.

  2. Play, sing or make sound into the microphone.

  3. When you are finished, tap the Play button in the control bar to stop recording. Tap the Play button again to hear your recording.

Adjust the microphone input level

While you record, the In level slider on the left shows the input level from the microphone. If the level turns red, drag the slider down (or record the part again more softly) to prevent distortion.

Extreme tuning garageband mac free
  1. Drag the In level slider up or down to set the input level.

    The In level slider is available if your iPad or input source supports input level control.

  2. If the input device supports left and right channels, tap Channel button under the In level slider, tap Input 1 or Input 2 to select the input channel, or tap Stereo to record in stereo.

Set the input level automatically

When an external microphone or other audio device (such as a headset or an audio interface) is connected to your iPad, the input level can be set automatically.

  • Tap the Input Settings button , then tap the Automatic switch.

Reduce unwanted noise

You can use a noise gate to reduce low-level input noise when you record. A noise gate cuts off the sound when it falls below a certain minimum level.

  1. Tap the Input Settings button , then turn Noise Gate on.

  2. Drag the Noise Gate slider until the noise stops or decreases to an acceptable level.

Turn on monitoring for an external microphone

When an external microphone or other audio device (such as a headset or an audio interface) is connected to your iPad, the Monitor button under the Out level slider becomes active.

  • Tap the Monitor button to turn monitoring on. Tap the button again to turn monitoring off.

Change the sound using a preset

How To Use Garageband On Mac

The Audio Recorder includes presets that appear after you record a sound. Each preset adds an interesting character to the recorded sound.

Extreme tuning garageband mac download
  1. Do one of the following:

    • In Fun view, tap or turn the dial to select one of the presets.

    • In Studio view, tap the icon in the middle of the screen and choose a preset from the list.

  2. Turn the knobs to change the sound of the preset.

You can try out different presets by tapping them and turning the knobs.

Set the key and scale for Extreme Tuning

The Extreme Tuning preset is a popular vocal effect that changes the pitch of your recording based on your song’s key and scale settings.

  • Tap the Settings button , tap Key Signature, then tap a new key or a different scale (major or minor).

If the actual key or scale of your song differs from the key or scale setting, the effect might be less pronounced, or might change the pitch of individual notes in undesirable ways.

When using Extreme Tuning, set the key of your song in GarageBand before applying the effect for best results. You can then additional effects like echo or reverb.

Set the key and scale of the song

Extreme Tuning uses your song's key and scale settings to apply the effect. If the actual key or scale of your song differs from the key or scale setting, the effect might be less pronounced, or might change the pitch of individual notes in the track in undesirable ways.

Garageband Mac Download

GarageBand songs defaults to the key of C.

Extreme Tuning Garageband Mac Download

  1. On iPhone and iPod Touch, tap Settings in the control bar, and then tap Song. On iPad, iPhone 6 Plus, and iPhone 7 Plus, tap Song Settings in the control bar.
  2. Tap Key.
  3. Tap the key for your song.
  4. Tap the scale for your song (major or minor).

Access the Extreme Tuning setting

Extreme Tuning is optimized for male and female voices, but you can apply it as a creative effect to any mono audio track, like a bass guitar or other live instrument.

Extreme Tuning Garageband Mac Os

To access the Extreme Tuning setting:

  1. In Tracks view, tap the audio region in an audio track to select it.
  2. Tap Microphone on the toolbar to open the Audio Recorder settings.
  3. On iPhone or iPod touch, tap Navigation , tap the current Audio Recorder setting (such as Clean), tap Fun, then tap Extreme Tuning.
    On iPad, iPhone 6 Plus, and iPhone 7 Plus, tap Fun, then tap the Extreme Tuning icon.
  4. Adjust Pitch Control and Distortion to fine tune the sound.

Add additional effects

To add additional effects like Reverb or Echo:

Garageband Download

  1. On iPhone and iPod Touch, tap Settings , then tap Track Controls . On iPad, iPhone 6 Plus, and iPhone 7 Plus, tap Track Controls .
  2. Under Master Effects, adjust the Echo and Reverb sliders, or tap Master Effects to change the Echo and Reverb presets.