Download Bootcamp 6 For Mac With Windows 10


On this page:

  • Installation guide


If you wish to run both macOS and Windows on a single Mac computer, UITS recommends using Apple's Boot Camp utility to install a 64-bit version of Windows on your Mac. In macOS, the Boot Camp Assistant app will help you partition your Mac hard drive to accommodate both operating systems, so you can install Windows from an installation disk or an ISO image stored on a USB flash drive.

Boot Camp 6 with Windows 10 support is now available to download. Using Boot Camp you can install Microsoft's latest desktop OS on your Mac with ease. Jun 05, 2020 Boot Camp lets you install Windows on a Mac computer in its own partition, so you can use either Windows or Mac OS X on your Mac computer. The Boot Camp Assistant application creates a Windows partition on your Mac and then restarts your Mac using your Windows installation disc. Oct 09, 2017 Simply click Install Windows at the bottom and then skip to step 5 and sit back for about 10 minutes while Windows 10 downloads and installs. If you have previously tried installing Parallels on your Mac before, Parallels will detect this and you may not see the auto-installer above. Boot Camp supports 64-bit versions of Windows 10 when used with a supported Mac. It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver. In This article, you will learn how to install Windows 10 on Mac with Boot Camp Assistant. If you are using mac user. Then you are already familiar with Boot Camp Assistant. If you don’t know, then don’t worry. I will explain for you that what is Boot Camp Assistant. However, There are many users who have bought Mac laptop or PC.

Partitioning your system's hard drive with Boot Camp Assistant may erase all your data. Before proceeding, back up/copy all personal files (documents, pictures, music, videos) to a flash drive, external hard drive, or cloud storage. Alternatively, you can use Time Machine with an external hard drive to back up your entire Mac computer; for instructions, see Mac Basics: Time Machine backs up your Mac. If you need assistance setting up Time Machine, contact your campus Support Center.

Pre-installation notes

  • This guide is written for macOS High Sierra, version 10.13.x or newer. If your computer cannot run macOS High Sierra version 10.13.x, you will need to follow Apple's Boot Camp Help: Install Windows on your Mac. If you don't have access to the online guide via a different device, print a copy of the Boot Camp Installation & Setup Guide.
  • Determine whether your computer can run Windows 10; refer to Apple's System requirements to install Windows on your Mac using Boot Camp.
  • To determine if your Mac supports this feature, open Boot Camp Assistant (Go > Utilities > Boot Camp Assistant), and then click Continue. If you see a 'Create a Windows 7 or later install disk' checkbox, your Mac supports this feature.
  • Make sure your computer meets these requirements:
    • At least 80 GB of free hard drive space
    • You have either the keyboard and mouse (or trackpad) that came with your Mac, or a USB keyboard and mouse
  • Obtain a USB flash drive (at least 16 GB).
  • During installation, you will be prompted to enter an account name and password; this is for the administrator account, and should not be the one you generally use. You also will be prompted to enter your time zone.
  • Ensure that the computer is plugged into a power source, as the entire process may take several hours.

Installation guide

  • These instructions are intended strictly as a guide for installing a fully updated 64-bit version of Windows on a macOS High Sierra 10.13.x or newer computer at IU; if your computer cannot run that version of macOS, you'll need to follow Apple's Boot Camp Help: Install Windows on your Mac.
  • Perform these steps in order.

Mac With Windows Xp

Step 1: Check for macOS updates

Before configuring Boot Camp, it is critical to make sure that your Mac's software is up-to-date, which lessens the risk of encountering problems during installation:

  1. In the menu bar, from the Apple menu, click App Store.
  2. At the top of the window, click Updates.
  3. If there are updates for your computer, in the upper right corner of the window, click Update All.

    If you're prompted, enter an administrator's username and password, and if prompted, allow your computer to restart.

Download Bootcamp 6 For Mac With Windows 10 64-bit

When your computer restarts, check for additional updates by repeating the steps above. Repeat the process until there are no new updates in the App Store.

Step 2: Confirm your macOS version

In the menu bar, from the Apple menu, click About This Mac. The window will display the version of macOS on your computer. If you aren't running macOS High Sierra (10.13.x), you need to follow Apple's Boot Camp Help: Install Windows on your Mac.

Step 3: Turn off FileVault

To proceed, you need to divide your Mac's hard drive into a section for macOS and a section for Windows. This process is called partitioning a disk, and requires that you disable FileVault (whole-disk encryption provided by Apple):

  1. In the menu bar, from the Apple menu, click System Preferences.
  2. Click Security & Privacy.
  3. Click FileVault. The FileVault control panel will open, locked by default.
  4. Before you can disable FileVault, it requires you to unlock the control panel to show that you're an administrator on your computer. To do so, click the lock icon. Enter your administrator username (if required) and your password.
  5. You'll then be able to click Turn Off FileVault.... To confirm, click Turn Off Encryption.

    Decrypting an encrypted drive can take some time, the exact time being determined by how much data is on your disk, the disk size, and your computer's hardware capabilities.

Step 4: Download Windows 10


The version of Windows 10 on IUware will not work with Boot Camp; you'll need to download Windows directly from Microsoft, and use a product key you get from IUware.

Downloading Windows 10 Education takes some time, depending on the speed of your internet connection. Do not attempt the download on a metered connection, such as a tethered cell phone.

  1. Get a product key:
    1. Go to IUware.
    2. On the left, click PC.
    3. Click Windows 10 Education, and choose the 64-bit version.
    4. Click Log in. If prompted, log in with your IU username and passphrase.
    5. Write the product key (a series of letters and numbers that resembles 'XXXXX-XXXXX-XXXXX-XXXXX-XXXXX') on paper, since you won't be able to open anything on your Mac while Windows is being installed.
  2. Download Windows 10:
    1. Navigate to Microsoft's Software Download page, and click Windows 10.
    2. In the Select edition drop-down list, choose Windows 10, and click Confirm.
    3. Select the appropriate language, and click Confirm.

Step 5: Use Boot Camp Assistant

Back up your files if you haven't yet done so. Partitioning your system's hard drive with Boot Camp Assistant may erase all files. To learn more, see Back up your Mac. For details about backing up your documents and content using cloud services at IU, see Store and share your individual files at IU.

The Boot Camp Assistant will help guide you through the process of adding Windows to your Mac.

  1. For an easy way to begin, click , the Spotlight icon. In the search bar, type boot camp assistant, and press Enter.
  2. The next screen describes what Boot Camp assistant does, and warns you to back up your disk if you haven't already done so. Click Continue.
  3. To select the installation tasks to complete, make sure Create a Windows 7 or later version install disk and Install Windows 7 or later version are both selected.

    Before continuing, make sure a USB drive (at least 16 GB) is connected to the system, and be aware that the entire contents of that flash drive will be erased.

  4. On the next screen, make sure the ISO file you just downloaded from Microsoft and the appropriate flash drive are both selected. Click Continue.
  5. To confirm that the drive will be overwritten, click Continue.

    This step will take some time, depending on your computer's hardware capabilities and your internet connection speed. Make sure your computer remains plugged into an AC outlet during this process.

  6. To begin creating a partition on your Mac's hard disk to hold Windows, authenticate with your administrator password.
  7. Use the slider between the Mac and Windows icons to select a size for the Windows partition.

    UITS recommends that you use 80 GB for just Windows, and 90 GB for Windows plus Microsoft Office.

  8. Click Install.

    This process will take several minutes to complete. Once the partition is created, your Mac will restart and begin installing Windows 10. You may be prompted several times for your administrator password.

Step 6: Install Windows 10

Follow the Windows installation wizard to begin installing Windows. You'll be prompted with several questions about how to configure Windows for your needs.

These steps will take some time, depending on your computer's hardware capabilities. Make sure your computer remains plugged into an AC outlet during this process.

  1. Select the language, time and currency format, and keyboard or input method for Windows. Click Next.
  2. On the next screen, enter the product key you got from IUWare.
  3. Choose the version of Windows that the product key unlocks (Windows 10 Education) and click Next.
  4. Read and accept the license terms, and click Next.
  5. Choose the partition on which Windows will be installed, called 'BOOTCAMP'. Click Format.
  6. To confirm that you wish to format the partition, click OK. To continue, click Next.
  7. The installer will copy Windows files and install any features and updates required. When prompted, click Restart Now to restart your Mac and continue the Windows Installation process.

Step 7: Configure Windows 10

After Windows restarts, you'll need to do some configuration.

Microsoft's digital assistant, Cortana, will help guide you through this process. If you are wearing headphones, remove them while your computer is restarting. Until you can install the Boot Camp support software, you may not be able to control the volume of Cortana with the volume keys on your computer.
  1. To select the appropriate region, choose United States, and click Yes.
  2. To select the keyboard layout, make sure US is selected, and click Yes.
  3. If you would like to add a secondary keyboard layout, use the next screen to do so; otherwise, click Skip.
  4. On the 'Let's connect you to a network 'screen, click Skip for Now.

Step 8: Create your Windows administrator account

The Windows administrator account you create should not be an account you use for general use of this computer.
  1. To create your account, type your name and click Next.
  2. Type a password and click Next. Do not use your IU network passphrase.
  3. Confirm your password by typing it again, and click Next.
  4. Select a series of three security questions, clicking Next after each one.
  5. Decide whether or not you want to use Cortana in Windows. Decide what privacy settings you would like to enable or disable, and click Accept.

Windows will do its final configurations. This step will take some time, depending on your computer's hardware capabilities. Make sure your computer remains plugged in to an AC outlet during this process.

Step 9: Install support software

Once Windows has started (may take some time), the Boot Camp installer will walk you through installing Apple's support software.

  1. To begin the process, click Next.
  2. Read and accept the license agreement, and click Install. All the Apple-specific software you need to run Windows efficiently on your computer will be installed.
  3. When the installer finishes, click Finish.
  4. To restart the computer, click Yes.
  5. When the computer restarts, click the trackpad or press any key to display the login field. Log in with the password you created earlier in the configuration process.

Step 10: Configure Windows Wi-Fi settings

  • To connect to a wireless network, in the system tray at the bottom right of the screen, click the Wi-Fi icon.
  • If you are off campus, connect to the wireless network you expect to use in your location. If you are on campus:
    • eduroam:

      The simplest and most secure way to connect to eduroam is to use the Eduroam Network Setup Tool. Alternatively, you can use the instructions below to connect manually.

      To connect manually, select eduroam from the list of available wireless networks, and enter your full IU email address (for example, [email protected]) and passphrase.

      • If you connect to eduroam at an institution other than an IU campus, you'll need to use the IU VPN to access some resources (such as remote desktop, library resources, and department drives).
      • For troubleshooting tips, see Troubleshoot your eduroam connection.
    • IU Secure: To connect, select IU Secure from the list of available wireless networks, and enter your IU username and passphrase.

    You have finished installing Windows on your Mac. If you need to install Microsoft Office, see About Microsoft Office 365 at IU.

    Step 11: Configure the default boot operating system

    You have the option to boot to either Windows or macOS when starting your Mac. You can also select one operating system for the computer to start by default.

    1. To shut down your Mac while you're in Windows, from the Start menu, click the Power button, and then click Shutdown.
    2. To boot into macOS, with the power off, press and hold the Option key and power on your Mac.
    3. Hold the Option key until you see two hard disk icons and a Wi-Fi network selector. Boot into macOS by clicking Macintosh HD (you'll select the default boot operating system momentarily).
    4. From the Startup Disk control panel, click the Apple menu. Click System Preferences, and then Startup Disk.
    5. To unlock the settings, click the Lock icon, and then type your administrator passphrase.
    6. To select the default boot operating system, click the disk that correlates to the operating system you would like to select. For macOS, choose Macintosh HD; for Windows, choose Bootcamp. If you would like to boot into the selected operating system now, click Restart.

    Switch operating systems

    Whenever you would like to switch operating systems:

    1. Shut down the computer.
    2. Press and hold the option key and power on your computer by pressing and releasing the power button.
    3. When you see two hard disk icons, release the option key.
    4. Click the hard disk icon that corresponds with the operating system you would like to boot. For macOS, choose Macintosh HD; for Windows, choose Bootcamp.

    Get help

    For help, contact your campus Support Center.

    Classic Mac Pro 5,1 (or simply cMP, also 4,1 upgraded to 5,1) is now considered by Apple as vintage. It’s pretty disappointing considering how capable and upgradable these machines still are. Installing Windows is no longer officially supported, but it’s completely possible though not quite easy.

    Another challenge is that macOS Mojave 10.14 now implies using Metal-capable GPU while most of them are not able to display Apple boot menu (which you normally see holding the Option key) required to boot into Windows. Basicaly your screenremains black until macOS is loaded. Well, some EFI bootable cards that support boot menu exist but they are released almost 10 years ago and are really outdated. What is more, none of them supports displaying of boot menu with 4k 60hz monitor connected.

    This guide is for those who want macOS Mojave + Windows 10 + modern GPU (in our case Sapphire Radeon Pulse RX 580 8GB).

    Updated 28 May 2019

    Installing Windows 10 in 5 steps

    It’s supposed that you have the latest Boot ROM version If not, please update first.

    Step 1: Use separate drive for Windows

    Boot Camp Assistant no longer supports cMP and doesn’t allow creating a separate partition for Windows.Windows has to be installed on a separate drive, which is good actually to avoid messing with partitions in future.

    We recommend using the internal SATA II connector in one of four drive bays or alternatively one of two SATA II connectors in the optical drive area. Using the HP 654540-001 3.5” → 2.5” adapter (7$) to place 2.5” SSD in a drive bay can be quite convenient.

    Of cause, SATA II (up to 300MB/s) is a bottleneck for modern 2.5” SSDs (up to 550 MB/s where SATA III is preferable) but real life experience shows that the difference is hardly noticable unless you deal with lots of big files (e.g. >1GB where sequential read/write speeds matter) on your system drive.

    We didn’t test using PCIe → SATA III adapter or PCIe → NVMe adapter for Windows partition. Many people reported it was not possible in their case. If you successfully did it please let us know in the comments below or via e-mail.

    Step 2: Create a bootable Windows 10 DVD disk

    Warning: DO NOT install Windows from a USB flash drive. It has been discovered that Windows when installed in EFI mode is corrupting the Mac Pro’s firmware by signing it with multiple Secure Boot (X.509) certificates. Also, you wouldn’t be able to boot into Windows after selecting its drive as bootable in macOS Preferences → Startup disk. Therefore Windows should only be installed in Legacy BIOS mode from an optical drive.

    Make sure that your Windows 10 ISO file fits on the DVD disk, in our case we had to burn Windows 10 1803 ISO (64-bit) to a single-layer DVD+R disc 4.7GB.

    Burning a DVD disk under macOS can be done with the following Terminal command:

    On Windows we recommend using the free ImgBurn app.

    Step 3: Boot from your Windows 10 DVD disk

    Turn on your mac while holding the “C” key to boot from the optical disk (if you have PCIe drives installed and can’t boot from the disc, remove those PCIe adapters).Proceed with installation normally until you see the “Where do you want to install Windows” drive selection screen.

    Step 4: Format the target drive

    Press Shift+F10 to launch command prompt. Type the following commands:

    Now make sure to select the correct target drive number N (NOT your macOS disk), after that type:

    You should now see your drive as Unallocated space.

    Press the “New” button to create necessary partitions. There should be only two partitions (for legacy installation, EFI mode creates four) automatically created:

    Select the newly created partition 2 and continue with installation normally. Your mac will be rebooted twice.Every reboot do not forget entering the boot menu (by holding the Option key) and selecting ‘Windows’ boot drive there. When finished, boot into Windows.

    Step 5: Install Windows drivers and Boot Camp utility

    Windows 10 installs all necessary drivers automatically except Bluetooth and internal speaker. These need to be installed from the original Boot Camp package for MacPro5,1.Download and install 7zip, download Brigadier 0.2.4 app, open Windows command prompt where Brigadier is located and type:

    When finished, it will create a folder BootCamp-031-11269, you need to install these for Bluetooth and internal speaker correspondingly, make sure you run the command prompt as administrator:

    Now we need newer BootCamp drivers intended for iMacPro1,1:

    When finished, it will create a folder BootCamp-041-55643, you need to run this command:

    When finished, reboot. We also recommend running Apple Software Update to update Wifi drivers:

    You probably don’t want to forget installing our awesome Macs Fan Control app, do you? :)

    Switching between macOS Mojave & Windows

    When you’re in macOS, use Preferences → Startup disk to select a boot drive:

    When you’re in Windows, use the Boot Camp Control Panel from your Windows tray to select a boot drive:

    This guide is based on this MacRumors thread. Special thanks to h9826790 for sharing his useful experience. Any comments are welcome.